Prüfingenieure für Standsicherheit Anerkennung
Inhalt
<div lang="en-x-mtfrom-de">Recognition as a test engineer for stability</div>
Begriffe im Kontext
nicht vorhanden
Fachlich freigegeben am
12.12.2022
Fachlich freigegeben durch
nicht vorhanden
§ 6 of the Ordinance on Test Engineers, Test Experts and Technical Tests
( Test Ordinance - PVO )
( Test Ordinance - PVO )
You can apply for recognition as a test engineer for stability in the fields of solid construction, metal construction and/or timber construction. After successful recognition, you will complete the two-year candidate period, during which you will be supervised by the Testing Center for Stability. You will then receive recognition as a test engineer for stability.
According to the PVO, the application must contain the following documents, among others:
- Application form
- CV
- Testimonies
- criminal record
- Proof of place of business and any branches
- Evidence of special requirements (see PVO §10 point 2.)
The requirements for an application are listed on our website in the "Information sheet on the recognition of test engineers". Listing these points here individually would not claim to be complete. You can get an overview under "Required documents".
Gebühr:
474€
EUR 474 per subject for recognition.
Project-dependent support costs will be incurred over the course of a further 2 years.
Project-dependent support costs will be incurred over the course of a further 2 years.
The procedure is listed on our website in the "Information sheet on the recognition of test engineers". After a successful recognition process, a two-year candidate period follows. During this time, the engineers to be examined are supervised by the testing center for stability. With the successful completion of the candidate period, recognition as a test engineer takes place.
The recognition process takes about 3 months.
This is followed by a two-year monitoring phase, which is obligatory until final recognition.
This is followed by a two-year monitoring phase, which is obligatory until final recognition.
The approval of test engineers and test experts will be revoked if the place of business is relocated outside of Hamburg.
- Recognition as a test engineer for stability
- Applicants can apply for recognition as a test engineer for stability in the fields of solid construction, metal construction and/or timber construction.
- Responsible: Authority for Urban Development and Housing, Office for Building Regulations and Structural Engineering