Störfallrelevante Errichtung und den Betrieb oder eine störfallrelevante Änderung einer nicht genehmigungsbedürftigen Anlage anzeigen

If you are planning an incident-relevant construction and operation or an incident-relevant change to an installation that does not require a permit and is an operating area or part of an operating area, you must register this.

Do you operate an installation that does not require a permit under immission control legislation, which is an operating area or part of an operating area and are planning an incident-relevant change to it?
Or are you planning the construction and operation of an installation that does not require a permit and is an operating area or part of an operating area?
These projects can lead to a significant increase in risk from the installation as a result of the construction or modification or other immission law requirements can no longer be guaranteed.
The immission control authorities must therefore be informed of these changes so that the requirements under immission law can be checked.
To do this, you must register your project with the responsible authority before it is carried out. The notification can be made in writing or electronically.

• Drawings, plans, explanations of the installation
• Presentation of the appropriate safety distance, if necessary for the determination an expert opinion on the effects that can be caused by the installation in the event of serious accidents
• other documents (if necessary, ask the competent authority).

The construction, operation or modification of an installation relevant to an incident must be notified to the competent authority if:

• The installation is not subject to licensing and is either an operating area or part of an operating area,
• an incident-relevant construction and operation or incident-relevant modification is planned and
• an application has not already been made for a permit for the construction and operation of an installation that is relevant to an incident or for the modification of an installation that does not require a permit.

An incident-relevant approval procedure for an installation not requiring approval is required and must be applied for if:

• The appropriate safety distance of the installation is undercut for the first time,
• the distance is further reduced or
• a significant increase in risk is triggered.
  

• You notify the competent authority of the accident-relevant construction or modification of the installation that does not require a permit before commissioning or implementing your project.
• You can do this using the EliA service or in writing. You enclose the necessary documents with the notification.
• The competent authority will confirm receipt of the notification and the enclosed documents. If necessary, the authority will request further and/or additional documents.
• No later than two months after receipt of the notification and the complete documents, the competent authority will inform you whether your project requires approval or not.
• If the competent authority informs you that no approval procedure is required, you as the operator or owner of the project can carry out the construction and operation or modification immediately after the authority's notification.
• However, if the authority comes to the conclusion that your project requires a permit, you must then apply for a permit for an accident-relevant construction or accident-relevant modification.

The application must have been submitted before the planned project is carried out.

• Objection
• Complaint
  

• Incident-relevant construction and operation or incident-relevant modification of an installation that does not require a permit Acceptance
• Notification of installation and operation or modification of an installation not subject to licensing that is relevant to a major incident and is an operating area or part of an operating area
• If the installation is an operating area or part of an operating area
• A permit in accordance with Section 23b BImSchG is not applied for
• Notification ELiA or in writing
• Responsible: Thuringian State Office for the Environment, Mining and Nature Conservation (TLUBN) or the districts and independent cities

Please contact the immission control licensing authorities in Thuringia: Thuringian State Office for the Environment, Mining and Nature Conservation (TLUBN) or the districts and independent cities.

The responsible authorities are the immission control licensing authorities of the state of Thuringia in the form of the Thuringian State Office for the Environment, Mining and Nature Conservation (TLUBN) and the lower immission control authorities of the districts and independent cities.